PRV-815 Premium Electrode Qualification Kit
Choose your language
This will change the language of the description for this product. It won't change the language of the site or other products.
  • PRV-815 Premium Electrode Qualification Kit
    Ideal for Qualifying or Certifying Materials
    • Use to Qualifying or Cerftifying Material & Installation
    • Verification fixture to measure resistance and flatness of pads included
    • Each electrode has a resistance of less than 10 ohms
    • Flatness is measured and within Prostat’s Specs
    • Premium Electrodes Capped to protect the pad against deformation
    • Light Dressing Pad is included to clean and dress the electrode pad if needed
    • Ceritificate of Calibration Traceable to NIST provided
    This kit includes the PRV-813 Conductive Rubber Electrode Verifier which is precision fabricated to electrically measure the surface flatness of the electrode’s conductive rubber surface to within approximately 0.003 inch. Considering surface irregularities, flatness insures the electrode’s ability to make full contact with a surface under test.

    The fixture includes 20 contact pads, each connected to a 10 megohm [1.0x107 (±1%) ohm] resistor, all connected in parallel to each other. If an electrode surface is uniformly flat and makes contact with all 20 pads, the electrode resistance will be between 4.95x105 to 5.05x105 ohms. The approximate range of the PRV-813, 5.00x105 ohms ±1%.

    Technical Specifications

    Technical Specifications are not available for this product.

    What's Included


    Sales Sheets

    Release Date

    2,167 KB


    No videos available for this product.