Unlike most commercial testers that come with a test head, the PDS-510 is a manual two pin tester which means that only two pins at a time can be tested. The user must design a way to connect the PDS-510 to the pins under test. In addition, they must have a way to check for damage to the device either by using a curve tracer or functional tester. HBM data collected using the PDS-510 can be used for data sheet reporting.
The PDS-510 can also be used to obtain a general idea of the Machine Model (MM) and Charged Device Model (CDM) ESD sensitivity of a device using the precision built-in DC power supply that can be used to charge items up to 4,000 VDC. The power supply is used to charge other fixtures that can deliver an external MM/CDM pulse to the device or charge a plate similar to classical CDM testing.
The PDS-510 comes complete with a universal battery charger, test leads and grounding accessories. A certificate of Calibration is also included.
If you are looking to test Shielded Bags per ANSI/ESD STM11.31, refer to the PBT-531 Shielded Bag Test Kit.
Technical Specifications
DISCHARGE OUTPUT
POWER SUPPLY OUTPUT
POWER SUPPLY ACCURACY
DISCHARGE WAVEFORM PER ANSI/ESD STM11.31
@ 500Ω: <20 nsec
Fall time @ 0Ω: 150±15 nsec
@ 500Ω: 200±20 nsec
Ringing: <15%
POWER
Power Supply: From 90VAC to 264VAC, 47Hz to 63Hz. UL and TUV 60950-1 approved.
BATTERY LIFE
DIMENSIONS
WEIGHT
What's Included
- PDS-510 HBM Discharge Simulator
- PRF-911GGL 36" Green Silicone Test Lead
- 510-053 4" Green Lead
- 510-054 4" Red Lead
- Q007B Common Point Ground Connector