PTS-879 Complete Wrist Strap/Footwear Checker Set
  • PTS-879 Complete Wrist Strap/Footwear Checker Set
    Perfect set up for the small repair depot
    • Perfect set up for the small repair depot
    • Includes is a single foot plate for measuring heel and sole grounders or shoes
    • No downtime waiting the instruments to return
    • Test wrist strap and, or footwear checkers, resistance measurement devices and indicators

    Every ESD safe environment requires wearing a wrist strap and controlled footwear when working on sensitive electronics for assembly or repair. The PTS-879 is the perfect set up for the small repair depot or assembly and repair department for daily testing of those controls.

    This set includes one each battery operated wrist strap/footwear checker. The checker can be mount on the wall with convenient Velcro supplied, or kept on the table top. Also included is a single foot plate for measuring heel and sole grounders or shoes. The foot plate attaches to the checker using a test lead included. Included is the PAR-809C Resistance Reference for self-certifying the wrist strap/footwear checker instead of sending the meter out for calibration or certification.

    The PAR-809C can also be used to verify any resistance measuring equipment for accuracy whenever you want. This instrument can save thousands of dollars in outside verification costs. No downtime waiting the instruments to return.

     

    Technical Specifications

    PAR-809C VARIABLE RESISTANCE REFERENCE

    OVERALL RANGE

    1.2E4 to 1.0E9 using 1% resistors

    ACCURACY

    ±2% tolerance

    CONTROLS

    A 12 Position Rotary Range knob selects specific reference resistance values – Knob Height 1.0"

    CONNECTIONS

    2 Banana receptacles at end of case (used to connect device under test in series with selected resistance).

    INDICATION

    12 LED indication lights; one LED for each resistor position of the selector knob

    Power

    One 9 volts battery (included) for LED indicator light operation only. Battery does not influence performance of the resistor references.

    CASE SIZE (LxWxH)

    4.0” x 3.0” x 2.0” (11.4cm x 9.5cm x 5.1cm)

    WEIGHT

    10.5oz

    PMT-872A ESD WRIST STRAP/FOOTWEAR CHECKER

    TEST VOLTAGE & CURRENT

    Nominal 9 volts and 0.006 µA to 1.0 mA

    POWER

    One (1) standard 9-volt battery, PROCELL, Eveready #216 (NEDA 1604, JIS 006P, IEC 6F22); or, Optional AC/DC converter.

    FACTORY ADJUSTED MEASUREMENT RANGES & ACCURACY

    Wrist Straps: 8.0x105 Ohms to 1.0x107 Ohms < ±5% (Factory Default)
    Footwear: 8.0x105 Ohms to 1.0x108 Ohms < ±5% (Factory Default)
    Wrist Straps: 8.0x105 Ohms to 3.5x107 Ohms < ±5%
    Footwear: 8.0x105 Ohms to 3.5x107 Ohms < ±5%

    TOGGLE RANGE SELECTION

    UP for Wrist Straps and DOWN for Footwear

    PUSH BUTTON

    27 mm Diameter, Metal spring loaded

    LIGHT INDICATORS (VERTICALLY ORIENTED. FROM TOP TO BOTTOM)

    FAIL High: Red LED
    PASS: Green LED with Audible Buzzer
    FAIL Low: Red LED
    BATTERY LOW: Yellow LED (At <8.2V Battery Voltage)

    AUDIBLE SIGNAL

    Fast, Individual "Beeping" Sound with Green PASS LED on.

    OPERATING RANGE

    5ºC to 49ºC (40ºF to 120ºF)

    STORAGE TEMPERATURE

    -15ºC to 60ºC (5ºF to 140ºF)

    RELATIVE HUMIDITY:

    0% to 90%
    Battery Life:
    40 hours typical
    Dimensions:
    115 mm x 69 mm x 26 mm

    WEIGHT

    6 oz.

    PFP-861 FOOTPLATE

    FOOT PLATE

    Stainless Steel 8.5 x 11 inches with 1/8 inch insulated back plate, 10mm male snap installed

    SNAP CONNECTOR

    Female 10mm snap with attached banana receptacle

    LEAD ASSEMBLY

    Green, six (6) foot stranded copper equipped with standard male banana plugs at each end

    Downloads

    No downloads available for this product.

    Videos

    No videos available for this product.